Concrete Calculator

Estimate concrete volume for a rectangular slab in cubic feet and cubic yards.

✓ Free to use✓ No signup✓ Clear calculations

Enter your details

Example values are prefilled. Change them to explore your scenario.

Calculations run locally in your browser. Estimates depend on the inputs and assumptions below.

How to use this calculator

  1. Measure or enter the starting values in the stated units.
  2. Set the conversion or material assumptions to match your project.
  3. Calculate, then check the estimate against product information or actual measurements.

Formula and assumptions

Cubic feet = length × width × depth / 12. Cubic yards = cubic feet / 27. Order estimate = volume × (1 + extra percentage / 100).

Worked example

A 10 ft × 10 ft slab at 4 inches thick requires about 1.2346 cubic yards before an extra-material allowance.

The prefilled scenario below uses these inputs:

  • Slab length (feet): 10
  • Slab width (feet): 10
  • Slab depth (inches): 4
  • Extra material (%): 10
Example outputResult
Net volume33.333333 cubic feet
Net volume (yards)1.234568 cubic yards
Volume with allowance1.358025 cubic yards

Read the result carefully

A cubic yard contains 3 × 3 × 3 cubic feet. Confusing square and cubic units can produce a large ordering error. An allowance for material variation increases the estimate but does not replace measuring the actual prepared area.

Limits and rounding

Estimates volume only. It does not specify structural thickness, reinforcement, base preparation, or mix strength. Verify slab design separately.

Displayed values are rounded for readability; the calculation uses unrounded intermediate values where practical. Change one input at a time to understand how the model responds.

Common questions

Are material quantities purchase instructions?

They are estimates. Confirm dimensions and supplier requirements before ordering.

Does the tool round intermediate values?

Intermediate calculations retain precision; displayed outputs and purchase quantities are rounded as labeled.

Method and references

NIST: unit conversion provides background. The formula and explicit assumptions above define this calculator’s model.